Dave,
Yes, those locking screws should always be screwed in. Things may work
without it in a temporary setting (for a quick test for instance), but
for a permanent station setup, screw in those jackscrews. If the
equipment is moved or there is anything that might "tug" on the cable or
vibrate it, the jackscrews will keep it from being disconnected.
73,
Don W3FPR
On 11/17/2019 6:35 PM, Dave Cole wrote:
Some troubleshooting later, I find the data cable plugged into the AUX
connector of the K3 has dropped out... Go figure, no one was even home...
Last time I fail to screw in the locking pins...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
