Ingo,
The KXUSB is an FTDI USB to serial adapter with a 3.5mm plug on the
serial end. Yes, it will provide computer control of the KX3 through
many software applications that support the KX3. That adapter can also
be used to allow KX3 Utility to load firmware and do other functions.
If you have a normal USB to serial adapter, you can easily build a short
equivalent of the KXSER cable - there is a schematic shown in the XG3
manual near the end.
73,
Don W3FPR
On 11/18/2019 1:57 PM, Ingo Meyer, DK3RED wrote:
Hello Elecrafters,
It is possible to control the KX3 via an USB cable named KXUSB. The
cable I have is too long for my station, so I always have to roll it in.
I could buy a shorter cable. But I don't know if it fits. Is the KXUSB
the same as a normal USB TTL converter cable?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
