Hi Tony,
I had the same problem a few years ago. It turned out to be the the "gold pins" problem on the front panel PC board. Removing and reinserting the connectors temporarily fixed the problem, but it soon returned until gold pins were installed. 73 Frank W3LPL ----- Original Message ----- From: "Tony Canning" <[email protected]> To: [email protected] Sent: Thursday, November 21, 2019 5:35:15 PM Subject: [Elecraft] K3 Front Panel Flash. Having some issues making the utility prog fill the FP flash, both MCU and DSP are OK.Tried two FTDI serial leads with same result.K3 Display = "FP Pending"Also PC utility displays error #000000048Any sugestions welcome. Thanks Tony G2NF [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
