"Geez, couldn't have just posted the link?" Well that's not any better because Elecraft seems to have used a page structure that does not change the URL. Navigate to the page of interest and copy the URL but that URL takes you to the parent page. Not a very clever design.
The update details are: 02.38 12/2/2019 * Bug fix: fan speed was reduced too quickly during cool-down * Switch to STBY if BAND CHANGE->STBY is enabled and the frequency (from XCVR or TX count) is below the amp's frequency range * Reduce reflected power fault events when band or ATU settings change * Reduce turn-off delay when XCVR KEY is used * Wait longer after band change to inform K3 that KPA1500 has switched to STBY when BANDCHANGE->STBY is YES * Skip ATU HiSWR retune if the current bin contains only the ATU setting that matches the ATU relays * Added ^DA command to display current ATU frequency, relay settings, and bypass SWR. Get with ^DA; response is like ^DA10128 AN1 Side TX 280 nH (L05) 571 pF (C36) SWR Bypass 4.0; * Add Tech Mode FAN SPEED DWELL menu item and ^DW command to set the time fans stay at a given speed after crossing a cool-down temperature threshold. * Add Tech Mode BOOT BLOCK VERSION menu item and ^BV command to display the boot block firmware version.. ^BV; response is like ^BV01.06;" Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
