My serial is 3376, second owner. It seems the first owner made some
interesting mods to it. For example, the backplate BNC-hole for the
2m-Antenna is filled with an external fuse for the KPA3. Does not seem
to be the standard...
Thanks for the info, Dick.
73 Gernot DF5RF
Am 12.12.2019 um 21:14 schrieb Dick Dievendorff:
Wow! Even my K3 S/N 00018 and it has screw holes on the side for mounting a
K144XV.
If you don't have a K144XV installed, the screw holes are filled with 6-32
pan head screws and a nut, so they won't be empty holes...
73 de Dick, K6KR
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of [email protected]
Sent: Thursday, December 12, 2019 11:31
To: Elecraft Reflector <[email protected]>
Subject: [Elecraft] K3 Sideplate for K144XV
Hi,
I just bought a used K144XV. My K3 side plate does not have the 3 holes for
the holding screws.
Does anybody has the layout of these holes available, so at least I could
drill them by myself? I guess have no other choices.
Thanks,
73 Gernot DF5RF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
