That's why I got mine from Elecraft. On Tue, Dec 24, 2019 at 9:05 AM Don Wilhelm <[email protected]> wrote:
> All 15 pin Y cables are not the same. You need to have all 15 pins > connected from end to end. VGA cables will NOT work. > > 73, > Don W3FPR > > On 12/24/2019 9:22 AM, Jim Rhodes wrote: > > The ACC cable can be connected through a simple Y cable (I think I bought > > mine from Elecraft) so that the remoterig box can be left connected all > the > > time. Or you can buy a YBox, or build your own like I did before they > were > > available. As for the PTT, I put together a box with 6 parallel RCA > jacks > > for PTT on one side and 6 more on the other side for KEYOUT. (I have amps > > for the 2 meter and 70 cm transverters.) The only other connection I need > > to worry about is the serial cable. I updated the i/o boards to the new > one > > with the USB connection so that I can leave both the serial and USB > cables > > connected at all times. So no cable switching when I want to go remote. I > > live in an apartment building, so my KPA500 is packed away in a box for > the > > time being. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- Jim K0XU [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
