If either the IF Output or the split approach with RX ANT IN and OUT is
used, the ports are protected during transmit. However, some of the
SDR receivers are in plastic / unshielded boxes and themselves may not
be adequately immune to RF. If one is concerned, it might be wise to
attempt to line the inside of the case with foil tape or enclose the
receiver in a suitable metal box {the way it should have been in the
first place}.
73
Bob, K4TAX
On 1/5/2020 8:40 PM, AL7CR wrote:
I used an SDR-IQ connected directly to the IF out for many years with no
problems whatever.
On Sun, Jan 5, 2020, at 2:29 PM, weaverwf wrote:
For those of you using an SDRplay as a panadapter with the K3S, what RF
protection do you use for the SDRplay?thanks and 73,Bill WE5PSent using
rock and chisel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
