Actually ALC is there because people expect it to be there. We recommend not 
using ALC between the KPA500 and K3.

73!
Jack, W6FB


> On Jan 12, 2020, at 12:00 PM, Bob McGraw K4TAX <[email protected]> wrote:
> 
> Yep, the power control circuit does have a bit of initial character 
> overshoot.    This is noticed when changing power levels or when changing 
> bands and a few other instances which I don't recall.   Since it occurs on 
> the first CW element only, and doesn't fault the amp,  I don't consider it of 
> concern.
> 
> You do have the ALC active from the amp and correctly set in the amp menu and 
> the K3S menu.......don't you?   That's what it is there for.  Just be sure 
> during normal operation the amp ALC is not active as seen on the K3S ALC 
> indicator.
> 
> 73
> 
> Bob, K4TAX
> 
> On 1/12/2020 11:32 AM, Gary Hunt via Elecraft wrote:
>> Just started noticing that occasionally the first character sent on CW will 
>> peg the watt meter on the KPA500.  It does not fault.  Sometimes a QSY to a 
>> different band or even a different band segment will trigger it again, 
>> sometimes not. Both of my antennas require my KAT500 which seems to have 
>> found acceptable matches for both antennas on the appropriate bands. It just 
>> uses a previous found solution when QSYing.  Trying to determine which piece 
>> of equipment might have an issue.  Planning on sending the K3 in for a check 
>> up but was hoping to have a K4 here first.
>> Any thoughts?
>> 73, Gary KC9EE
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to