I’ve always used CAT control for PTT with 100% success with all of my software applications. That way I can switch between SSB and Data and find it not necessary to make any radio adjustments.
Bob, K4TAX Sent from my iPhone > On Jan 20, 2020, at 2:41 PM, Wes <[email protected]> wrote: > > So have I, perhaps even longer. The only downside with Elecraft radios is > that VOX audio sampling follows the mic/line gain setting and is of course > affected by them. Without judicious setting of digital mode line level/sound > card level/WSJT "power level" settings, there is a nonsensical need to > readjust VOX gain when changing modes. A request to remember VOX gain > between modes has always fallen on deaf ears. With the K4 now the focus, this > will never happen. > > Wes N7WS > > >> On 1/20/2020 11:45 AM, Jim Brown wrote: >> >> VOX is a perfectly good way to key the radio. I've used nothing but VOX for >> SSB, RTTY, and WSJT modes for at least 15 years. >> >> 73, Jim K9YC >> ______________________________________________________________ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
