I had similar issue. i used a 3.5mm to 2.5mm audio cable (each end three segment), from a Yaesu SCU-39 cable kit I was not using which looked perfect for the job.
However it turned out the centre segment was not wired, with same results as above. Initially I thought my line-in was possibly not stereo on rear of my Dell PC as it is a combo pink/blue mic/line in jack. Found a stereo 3.5mm cable and luckily a 2.5/2.5mm adaptor for one end. Looking much better, the display better than any of several others I have tried incl non free. I have found the Omni-rig cat control a little buggy sometimes, losing mode control, and freq readout offset. Re; setup and restart seems to get it back good. Early days, and I think i just need more practice. I am using a realtek sound card at the moment set 192KHz, and have ordered an ASUS Xonar U7 and an stereo isolation lit with audio lines. I would like a PX3 , however not at current pricing, and looking at a used unit if some one is selling. Adrian ... vk4tux -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
