I have a Bodnar dual output GPSDO although I don't use it on my K3S. Be advised
that the software is very clunky and while you can get two different frequencies
out, there are limitations on what they can be.
Frankly, I don't know why you would want something like this for the K3(S). The
high stability TCXO is fine if you leave the radio powered continuously as I do,
otherwise, it's quite good after about a 20 minute warmup. Use your counter to
measure the TCXO directly and adjust the ref cal parameter manually.
Wes N7WS
On 2/5/2020 12:48 PM, Dave Van Wallaghen wrote:
Hi Gary,
Here is the one I use:
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&products_id=234
It feeds my K3 and I also use the other port to calibrate the oscillator for
the main MCU on all the K2's I service.
73,
Dave, W8FGU
On 2/5/2020 2:43:46 PM, "Gary Peterson" <[email protected]> wrote:
Does anyone have any recommendations for a particular 10 MHz GPS disciplined
oscillator that would work well as an external reference for a K3S? I might
also use a GPSDO as an external time base for my frequency counter. Either
recommendations or products one should avoid would be most appreciated. Feel
free to reply off list.
Thanks in advance.
Gary, K0CX
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
