N1MM Logger has a built in Spectrum Display that controls a number of
SDRs, connected either to your IF or to the RX Ant In/Out loop with a
splitter, as well as your K3. Added feature is that it will display
spots as they come in, associated with the peak on the display. See
https://n1mmwp.hamdocs.com/manual-windows/spectrum-display-window/
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
On 2/17/2020 8:17 AM, [email protected] wrote:
Hi all,
I'm wondering what software solutions are available to provide an SDR band
display, which incorporates Point-and-Click functionality that controls both
the SDR and the K3 frequency?
In other words, identifying a signal on an SDR display and the action of
clicking on that signal moves both the SDR and the K3 frequency to it.
I'm hoping there is one single software solution that incorporates both
features requiring only one single USB interconnect into the PC.
Thanks
Duane
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
