Nice try,
but no, 2 TONE is OFF . I should've said that.
As a workaround I reduced Mic Gain a little, switched on TX Gate and set
it to a level the tone wouldn't trigger TX Gate. Now it is not audible
anymore when i don't speak, but comes on again as i trigger TX Gate with
my voice.
It is not very loud, but the otherwise beautiful audio is 'unaesthetic'.
Thank you.
Am 04.03.20 um 02:43 schrieb Bob McGraw K4TAX:
Check the CONFIG menu for the 2 TONE. Make sure it is OFF.
73
Bob, K4TAX
On 3/3/2020 2:31 PM, Martin wrote:
Elecrafters,
my K3 shows a strange Problem. On USB it transmits a tone at about
2khz above (respectively on LSB about 2khz below) carrierpoint. This
happens even with no mic attached. The level of the tone follows the
setting of the 2.4khz level of TXEQ. It also follows Mic Gain level.
Anyone know what to do?
Setup: Dynamic Mic on Frontpanel (or removed, doesn't matter), tap
XMIT, listen on sdr-console.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
