Lee,
That should be fine. Try doing the Transmit Gain Calibration on the K3
and if it persists afterwards, email [email protected].
73,
Don W3FPR
On 3/4/2020 1:54 PM, Leroy Buller wrote:
Don. It goes to 12.9 volts on 20. On 40 it goes to 13.0. Current on
20 goes to 24 amps then gives me the message. No rig runner. 24 inch
#10 wire to the k3
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
