Is the same cable as you would use with the Elecraft XG3, take a look at the end of the XG3 manual: https://ftp.elecraft.com/XG3/Manuals%20Downloads/E740154%20XG3%20Owner%27s%20Manual.pdf
The tip(1) is TX and the Ring(2) is RX... and well you guessed it... the Sleeve(3) is Ground. So on a DB9 (D-Sub) connector, pin 3 goes to the Tip, Pin 2 goes to the Ring and Pin 5 to the Sleeve. Max NG7M On Tue, Mar 17, 2020 at 7:36 PM Mike Short <[email protected]> wrote: > I need the pinout for the KXUSB cable, and can't seem to find anything on > Elecraft website. > I need to make an adapter to use the KXUSB cable with a K3. > > Mike > AI4NS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- M. George ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
