Dave,
HI RFI means the sensor on the RX antenna input is seeing a high level
of RF. If you are operating into an antenna, switch to a dummy load
while you are troubleshooting. It just might be a quirk of your setup,
and if you have no RX Antenna connected, it could be a troubleshooting
tool for you.
73,
Don W3FPR
On 3/24/2020 2:02 PM, David Olean wrote:
Thanks so much to all who responded. One thing I did not mention is
that I get a "HI RFI" error message at times when I key the radio. It
makes me wonder if there is something else wrong.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com