John, I concur. When I am running them especially on 20M I find I have the LO Cut at .35 and the HI Cut at 2.25-2.35. Audio is good. Below 2.25 if the calling station is a little off freq or has terrible audio I may waste time trying to get the call. N2TK, Tony
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of [email protected] Sent: Wednesday, April 1, 2020 7:30 AM To: [email protected] Subject: Re: [Elecraft] K3 SSB Filters I concur. I have 2.8, 2.1 and 1.8 KHz 8 pole roofing filters in my K3S. I made over 8500 SSB QSOs last month and I used the 2.1 KHz roofing filter for all of them. John KK9A Jim Brown K9YC wrote: I tried that and didn't like the result. I prefer 2.1 kHz 8 pole 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
