The same PL-259 reducers for RG-8X works for RG-6. Same for BNC connectors.
Bob, K4TAX Sent from my iPhone > On Apr 2, 2020, at 10:13 PM, Ignacy <[email protected]> wrote: > > The plus of RG6 is low price, less than 10c a foot. In receive applications, > they seem to be lasting forever. In transmit too but small nuisances are > necessity to use a tuner for low SWR antennas and nonstandard connectors. > But running two in parallel does not make any sense. > > Half a year ago I found Rg6's 50 Ohm equivalent on ebay. Altelix AX240 for > $99/1000ft. Measured parameters same as LMR240. The plus of cheap and good > 1000-ft roll (with crimp connectors that can be attached in 30 sec) is that > the coax can be cut as needed, with no worries about cost. > > Ignacy NO9E > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
