hello Don, hello everyone, I would like to be sure about 2 measurements on page 44 for my KPA100 Q9 tab: tad; is this the radiator? infinite measure for the central pin of J2, I also find: infinite
the question is are the measurements good? the whole thing being to have a good base thank you Don and all of you for your help # K2 7369 + KPA100 in progress Le dim. 5 avr. 2020 à 22:09, Don Wilhelm <[email protected]> a écrit : > > Your post made it to the reflector OK. > You must use plain text, HTML will be rejected. > Direct email to [email protected]. > > What is your problem with the K2 and KPA100? The instructions for > alignment of the KPA100 are in the manual. > > 73, > Don W3FPR > > On 4/5/2020 3:12 PM, Christophe aufacf wrote: > > hello to all , > > > > I am subscribed to the elecraft list, I receive the list well but I am > > unable to send messages > > > > would it be possible for you to see what's going on? > > > > thank you in advance I would like to continue my K2 after 3 years of > > stopping > > > > as i need to ask questions thanks again > > > > -- 73 , F8ACF56 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
