hello don and All , Thank you for the info
I'm going back to my K2 73 , F8ACF #K2 7369 + KP100 in progress Le lun. 6 avr. 2020 à 23:33, Don Wilhelm <donw...@embarqmail.com> a écrit : > > Christophe, > > Since your K2 is SN 7369, it does not need any modifications or > alignment to add the KPA100 - that 10/12m VFO/ALC Mod kit is only for > older K2s, those component changes are already present in your K2. > > You will have to add the headers on the RF Board if they are not already > present. The KPA100 manual will tell you when to install them. > > 73, > Don W3FPR > > On 4/6/2020 4:03 PM, Christophe aufacf wrote: > > Good afternoon all > > > > for the modifications of the K2 to put a KPA100 > > > > must be done before putting the KPA100 so measurement and adjustments > > > > or can this be done once KP100 is set and installed? > > > > could give me the page in the manual of K2 or aligns 12 / 10M ? > > > > thank you in advance, I'm happy to get back on my K2 after more than 3 > > years off, so I have to get back in the bath > > > > # K2 7369 + KPA100 in progress > > > > -- 73 , F8ACF56 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com