In the TX Monitor Menu, check that "Mod En" is enabled. Alan N1AL
On 2020-04-10 21:48, Tom and Karen Norris wrote: > I've been almost 2 years getting to this point of assembling the P3 Kit. > The K3s I got to right away. Now that I have the P3 together and working > the only problem I have is I cannot get the CW Split signal to show on the > P3 display. I've gone through the Fred Cady (what a life saver! We will > miss him and his way of saying things that even I can understand!) K3s/P3 > manual and duplicated his TXMonMenu settings, the PEP and SWR meters work > (Fred said they may not match the K3s meters and they don't) but the CW > Transmit signal does not appear on the display at all, either with Split > enabled or disabled. Is there another setting someplace that I'm missing or > a setting that I have wrong? Any help would be greatly appreciated! > Tom NB5Q > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
