There has to be another application changing the actual Window's audio levels. Document what those levels are in Sound Devices Manager when all is working correctly vs when not.Also, I'm not sure what the upside is for adding the MicrokeyerII to the equation. The K3S is capable of FT8 with no additional interface. That was why I updated my K3 after a lightning strike took out the MicroKeyerII. 73 Gary KC9EE
Sent from Yahoo Mail on Android On Sat, Apr 11, 2020 at 1:16 PM, Pete W1RM<[email protected]> wrote: The K3S works just fine on FT modes. I had my line level set for 11 but today I had to crank my line level way up to get the same output level. I've made no changes that I'm aware of. My Line out goes to the micro Keyer II Any suggestions as to why and how to fix? I'm using a micro Keyer II with software version 9.2.2 Pete, W1RM [email protected] -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#19356): https://groups.io/g/microHAM/message/19356 Mute This Topic: https://groups.io/mt/72950102/383090 Group Owner: [email protected] Unsubscribe: https://groups.io/g/microHAM/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=- ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
