GM,
I am trying to get my K3 - KAT500 combination (which works well alone)
to accept the addition of a XV144 (which works well with the K3 alone).
Having to plug and unplug control cables to switch from HF to VHF is a
non-starter. I had hoped to pick of the control for the XV144 from the
"AMP" socket on the KAT500, but when this is done, I get the message
"turn on KAT500" on the K3 display, and nothing works until the plug is
removed from the XV144.
I have contacted Support about this, but thought I would also see if the
collective wisdom of this group can give any guidance.
Thanks for your consideration,
George, W3HBM (hunkered down at home in ) Bar Harbor, ME
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
