Thanks Tom, interesting to know. *When troubleshooting it would still be of great help to know how the KX2 encoder is connected to the main bord - plugged in or soldered?*
73, Heinz HB9BCB Tommy wrote > I have seen the same on my KX2, while dialing it seems to freeze at > times for a second or so at a time. Even after being on only a few > minutes. Kind of annoying but not too worrying to me. At least for now. > Serial # 01927 > > 73 de Tom KB2SMS > > > On 4/18/20 10:44 AM, Heinz Baertschi wrote: >> A colleague's KX2 has had the following symptom several times after >> approx. 2 >> hours of portable operation at ambient temperatures of approx. 20-25 °C >> and >> locations in the shade or in the sun: >> >> Sluggish and intermittent VFO display when dialling to a new frequency. >> The >> selected frequency then appeared correctly after approx. 0.5-1.5 seconds. >> >> Has anyone noticed the same symptom and if so, what had to be done to fix >> it? >> >> Any help would be appreciated? >> >> 73 tks, >> Heinz HB9BCB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto: > [email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to > [email protected] -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
