I agree. Match the antenna, whatever the Z may be, to the feed line.   This is 
most efficiently done at the antenna feed-point.   

However with good loss coax on HF, matching at the transmitter end is easier 
and less complex and less expensive.  

Bob, K4TAX


Sent from my iPhone

> On Apr 19, 2020, at 4:13 PM, W2xj <[email protected]> wrote:
> 
> You can get an AT-615B from Array Solutions now and do this. I put 10 in a 
> club station for our various wire arrays. They do everything you need.
> 
> BTW I disagree about this 50 Ohm antenna thing. In my world of commercial 
> high powered broadcasting 30 MHz and under, there are almost never resonant, 
> matched 50 ohm arrays.  
> 
> Sent from my iPad
> 
>> On Apr 19, 2020, at 8:41 AM, Richard Thorne <[email protected]> wrote:
>> 
>> 
>> Eric/Wayne,
>> 
>> Has there been any work done for a potential dedicated remote antenna tuner?
>> 
>> A remote tuner that could handle 500 or 1500 watts to match up with amps 
>> power wise (Or just a barefoot K3/K4). Maybe a black box between the LAN on 
>> the K4 or ACC on the K3 so control signals could be sent to the tuner via 
>> the coax.
>> 
>> I’m a firm believer in 50 ohm matched antennas, but if a tuner is required 
>> it needs to be at the feed point.
>> 
>> Rich - N5ZC
>> Sent from my iPad
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to