You're safe, but obviously your K3 isn't... ----- Original Message -----
From: [email protected] To: [email protected], [email protected] Cc: [email protected] Sent: Monday, April 20, 2020 5:40:26 PM Subject: RE: [Elecraft] USB Noise core gets hot when operating FT*? I’m not sure, but, it’s a good point. I’m only running 50Watts. From: [email protected] <[email protected]> Sent: Monday, April 20, 2020 1:36 PM To: [email protected] Cc: [email protected] Subject: Re: [Elecraft] USB Noise core gets hot when operating FT*? With your antenna that close, are you sure you're not exceeding human body RF exposure requirements? 73 Frank W3LPL ----- Original Message ----- From: [email protected] To: [email protected] Sent: Sunday, April 19, 2020 12:46:55 AM Subject: [Elecraft] USB Noise core gets hot when operating FT*? Today I was working a digital mode (FT8) and lost connection to the radio. I cycled power with no success. On reseating the USB connection at the computer I felt the ferrite core was HOT. The cable didn't feel hot at all. I'm using a 20m hamstick in the office as my antenna. I shut everything down to cool off. Afterwards everything seems to be working correctly. Any ideas? Tnx and 73 Jerry D. Moore AE4PB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
