Does anyone have any experience using the KRC2 with an Icom radio? This
is a working KRC2 that was on a K3 at one time.
To start I cannot get the KRC2 to connect to my PC. I have used
straight through cable, Null modem Cable and a USB to Serial Cable. I
have run the program on an old XP laptop and my Win10 machine. I have
even used a "real" comport. None of those configurations will connect
to the device. The DL switch is set properly.
The KRC2 passes all of the manual button press tests.
I have the jumpers set for ICOM on KRC2 board. The ICOM is sending the
band voltage to the unit as measured with a Volt meter.
Do you really need the computer to make it work? I am thinking that is
mainly for firmware and antenna relay settings
I am just trying to control a 419B bandpass filter.
Any thoughts?
Rich
K3RWN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
