Ray:
I appropriated your idea because it seemed elegant, and I also find it works
FB. To save just a bit of weight I attached a crimp-on type BNC directly to
the speaker wires, so I do not need to carry a BNC-banana plug adapter. I
wind it all right back onto the plastic spool that the wire came on, wrap a
rubber band around it, and have a neat antenna package. BTW, I found out
the hard way that it helps to wind one leg back onto the spool at a time...
don't wind them on together or you will spend WAY too much time getting them
untangled and separated in the field!
In response to the original question about installation of the KXB3080, the
only problem I had was that I shorted something when installing the module,
I still don't know what, but I had to take it out and move wires and toroid
leads around until it was cured. The spaces are VERY tight. The symptom
was much lower power output on 80 meters than on the other bands.
-Scott N3SW
------------------------------
Message: 4
Date: Sun, 25 Jun 2006 07:29:17 -0700 (PDT)
From: Raymond Albers <[EMAIL PROTECTED]>
Subject: [Elecraft] 4 band antenna for KX-1
To: [email protected]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=iso-8859-1
Jay, W6CJ wrote:
Has anyone found some universal wire antenna lengths that will work
with the
KX-1 and internal antenna tuner - over all four (80, 40, 30, 20) bands?
I bought a 50ft roll of speaker wire from Radio Shack and un-zipped the
two wires so I had an antenna wire and a counterpoise. It turned out mine
was 51 and a fraction feet long. I have not experimented with different
lengths, just used what came on the spool. I find it loads very nicely on
all 4 bands with the antenna wire as a sloper or inverted L, and the
counterpoise stretched out or even place in a square or circle (e.g.,
around the periphery of a hotel room).
Your results may vary, of course.
73
Ray K2HYD
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
