Hi Jack! After cycling the main power the HV in standby is back to 70 V. But, every time I go to operate mode, the error reoccurs.
This is with what I believe was the old style interlock switch (has a shaft attached to the top cover to engage the switch when the top is screwed down). Can’t tell if it is properly engaging. But the behavior is the same when the top cover is totally removed. How picky is this switch. I bought the amp used, and the assembly manual online at elecraft doesn’t cover the old interlock switch. Thanks for your help! Tom W4KX Sent from my iPad > On May 3, 2020, at 3:06 PM, Jack Brindle <jackbrin...@me.com> wrote: > > A “270V ERR” fault indicates that the TR switch bias supply is not working. > This may be caused by the top cover being removed, the safety switch attached > to the top cover becoming loose or an actual failure of the 270V supply. > Since your main HV supply is now down close to 0V, it looks like you have > power supply issues. You should call technical support on Monday to get help. > > 73 and good luck getting your KPA going again. > Jack, W6FB > > >> On May 3, 2020, at 11:32 AM, Tom Doligalski via Elecraft >> <elecraft@mailman.qth.net> wrote: >> >> My KPA500 has been working fine waited for 115 V. Just now it has been >> throwing a “25=70 VAC” fault! >> >> Can anyone lead me in helping this? Fuses look good. HV read 0.1 v when in >> standby, which is FAR from the 70 some volts it used to read. >> >> Thanks! >> >> Tom W4KX >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
