The 2.5 mm is about 0.100 in. A 3/32 is .093 or 0.007 in smaller. Sent from my iPhone ...nr4c. bill
> On May 5, 2020, at 11:16 PM, Grant Youngman <[email protected]> wrote: > > Checked the manual. It’s on the TIP connection of ACC2. Set ACC2 IO in the > menu to LO=PTT. > > Grant NQ5T > >> On May 5, 2020, at 11:06 PM, Grant Youngman <[email protected]> wrote: >> >> The ACC2 connector is a 2.5mm TRS connector, not 1/8” (3.5mm). PTT is >> either on the tip or ring, I don’t recall which off hand — check the manual. >> >> Grant NQ5T >> >>> >>> -- On the KX3, plug the headset's mike and phone plugs into the respective >>> jacks, and use a momentary-contact switch on a mono-style 1/8" plug in the >>> ACC2 jack as a manual PTT switch. >>> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
