Thanks all for your suggestions how to use the old Heil headset with an
HC-4 element.
Unfortunately, I couldn't make it work and sound good with the KX3.
You have to crank up the mic gain very high and it sounds like you're in
a barrel!
It's an old headset but I don't want to throw it away, so I'll probably
replace the
HC-4 element with an electret.
Bert VE3NR
On 4/24/2020 9:59 PM, Nr4c wrote:
Before plugging in the mic from Menu set mic buttons to OFF. See the manual
about this. Also be sure Bias is OFF.
You will need to tap the Transmit button to speak and again to stop.
Or use VOX, see manual to set this up.
Go have fun!
Sent from my iPhone
...nr4c. bill
On Apr 24, 2020, at 8:29 PM, Bert <[email protected]> wrote:
Hi all,
I want to use an older Heil headset, with an HC-4 element, with my KX3.
Despite having tried different settings for the microphone, I can't make it
work.
Your ideas and suggestions would be much appreciated. Thanks!
Bert VE3NR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
