Bert,
When using a mono plug in the KX3 mic jack, turn off BIAS and also set
MIC BTN to OFF.
Alternately, use the splitter recommended by Walter Underwood - if using
that splitter, turn MIC BIAS on.
73,
Don W3FPR
On 5/14/2020 2:15 PM, Bert wrote:
The original Heil headset with the HC-4 element didn't work with the KX3.
I have now replaced the HC-4 with an electret, which sounded
great trying it with the KX3 before installing it in the Heil headset.
The electret, by itself, was plugged in to the KX3 with a stereo plug.
After electret installed in the headset I have quite a lot of hum. The
headset mic is connected with a mono plug to the KX3.
Any ideas why the hum appears after mounting the electret in the headset?
Bert VE3NR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
