I definitely wouldn't bother to modify the KPA1500 to have a monitor loop!
I bought two sensors -- one between the K3 and the KPA1500, and the
other between the amplifer output and the antenna feedline. The
LP500/LP700 supports up to four sensors.
This allows easy swapping from exciter output to amplifier output with a
button press, and allows amplifier linearity monitoring using the LP700.
Warren, KD4Z
On 5/20/2020 11:38 AM, [email protected] wrote:
I am thinking about adding a Telepost LP700 to my station but I would need
to insert it between the amp and tuner (which are integrated together in the
KPA1500).
Any ideas if it is worth doing something to loop the RF out of the amp to
the coupler and back in again? Probably no easy way to do it.
Just a thought.
Dave wo2x
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
