Paul,
As far as measuring the inductances, the listed values are only average.
Count the toroid turns correctly and there will be no problem.
73,
Don W3FPR
On 5/29/2020 5:16 PM, Paul Gacek via Elecraft wrote:
John
Fair question as to why not.
I guess it boils down to tolerance in the design. As T1 and T2 are impedance
matches maybe my error isn’t going to push things out of tolerance.
That written, the consensus feed back is I have counted the turns wrong on T1
and it’s easy enough to reduce a turn (versus adding one!).
I just completed the front panel tests and so before heading into the VFO
alignment, I’ll make the correction.
For all the inductors (such as L9,L10 etc) I measure the inductance before
installing them.
Paul
On May 29, 2020, at 1:31 PM, John Harper <[email protected]> wrote:
Why would you choose not correct a known error?
Correct it and rule it out as a possible culprit in the event you have a
problem with the radio. If you don't correct it, and end up having a
problem, you'll wonder....
John AE5X
https://ae5x.blogspot.com
Any guidance on whether I should correct this is welcome.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
