A layer of friction tape is also a good way to keep the connectors sticky free.
Dave wo2x -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Josh Fiden Sent: Wednesday, June 3, 2020 4:35 PM To: Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] FIXED--was NOT the feedline To make it come off *really* clean, I like to put the 1st layer of vinyl tape sticky side out. Then self-fusing tape, another layer of vinyl tape (3m 33+ or 88). And because overkill is never enough, paint with some Scotchkote last! 73 Josh W6XU Sent from my mobile device >> On Jun 3, 2020, at 12:50 PM, Buck <[email protected]> wrote: > Electrical tape, then the self-fusing tape, then electrical tape. > The first layer of electrical tape makes it easier to removing the > fusing tape later ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
