Sure sounds like dirty contacts related to the front panel. I would
NOT try re-initialization without being sure the radio is working as it
should and reliably. One could end up with more than one issue to deal
with and diagnose.
73
Bob, K4TAX
On 6/6/2020 9:11 AM, Jim McCook wrote:
Thanks to those who responded with good suggestions. This morning I
turned it on and saw a different set of error codes, but there was
audio. Powered off and on and saw MAIN freq display, but SUB had
disappeared. More power off/on resulted in going back to normal
operation. It has been fine for the last hour. Will try the re
initialization if it fails again. It may be the pins on front panel as
some have suggested. I hesitate to pull off the front panel, but will
talk to a friend who assembled his K3 about that. 73, Jim W6YA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
This email has been checked for viruses by AVG.
https://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
