Hi Jim I bought a 1234 in March of 2020. I am using this iPhone 10 XR and NO-IP to control it from remote locations. CW worked right away and SSB needed three menu changes to the K3S. The monitor for SSB must be set to minimum, MIC+LIN must be set to off and MIC SEL must be set to LInE In. I have checked into the Sunday morning 160 meter net remotely and everyone says it sounds fine. One thing I like a lot is the 15 macros I have been able to write into the 1234 to allow me to make changes remotely in the event I forget to do it before I go. I work 160 SSB and CW on 80 - 10. I can change antennas on the K3S and tune them from the remote. 160 uses a dipole and the rest of the bands a vertical. Good luck. I had another remote but quit using it years ago because I had to always change several cables and it did not have many Macros. This one lets me change and get on the air anyplace with my phone as long as the K3S is on. Ken W0CZ. [email protected] Sent from my iPhone
> On Jun 14, 2020, at 11:01 AM, James Holohan <[email protected]> wrote: > > Hi. > Just wondering if anyone has used the MFJ 1234 Server with a K3S? I'm > thinking of purchasing one but I'd like to hear from anyone with experience > of using it. > Jim EI4HH > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
