Hello Henk, I will break out the multimeter today. I finished putting it all together late last night and was too frustrated to go any further.
Also, I hear nothing and the S-Meter literally has no activity but I can hear static. Thanks for the tips and I will reply back once I have checked the cables for shorts. 73 K5RHD /randy > On Jun 19, 2020, at 12:51 AM, <[email protected]> <[email protected]> wrote: > > Just a thought: can you receive (preferably weak) stations on 2 meters? > That proves the Ant3 coax is OK. > > 73 Henk > > Van: hdv <[email protected] <mailto:[email protected]>> > Verzonden: vrijdag 19 juni 2020 08:06 > Aan: Randy Diddel <[email protected] <mailto:[email protected]>> > Onderwerp: RE: [Elecraft] New K144XV module installed no power out.. > > Hi Randy > > It looks like the unit works ok, but cannot transfer power somewhere. > > Check the Ant3 coax for a short. > Check with an ohm meter if the TMP output connector makes connection from > center BNC to center pin of TMP on pcb. > > If that is ok, check the voltages on the PIN diodes in rx and tx and the > diodes themselves. > > 73 Henk > PA0C > > > > Verzonden vanaf mijn Samsung Galaxy-smartphone. > > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virusvrij. www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
