I'm suddenly out of a signal. I get hiss but no signal. I'm using a k1 fil 2 40/20 board.
I was getting weak gain on the 40m side so went in to peak the L1/L2 L5/L6 Inductors. I messed about with them but was unable to peak them as I heard no change in the volume of the hiss. I also tried C2 Gain tweak and not joy there either. I hear no change in the hiss volume as I turn it. I rigged up my 7300 with a dummy load and xmitted on 7050 and 14050 and heard a signal but still no effect by changing L1/L2 or L5/L6 I pulled the band board looking for any issues with soldering or whatever and found nothing. Put the board back in and now I get zip. No receive at all, just hissing. It was working fine yesterday although I felt the gain was very low and needed adjustment which led me to this point in time. Suggestions on how to get it going again? 73 Steve, W1SFR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
