Normally the TRN x OUT parameter can be adjusted from H to L by rotating the VFO knob or tapping the BAND+/BAND- buttons. When you get to the 'H 0.01' display, rotate the VFO knob counterclockwise and you should see the H turn to an L.
If that does not happen, check your firmware levels. 73, Don W3FPR > -----Original Message----- > > I am trying to configure my first transverter on my K2 - the > XV-50, and am having some trouble with the secondary menu > options. I don't see how to switch the TRN x 'OUT' parameter > from HI to LOW power mode ... it cycles through H 0.01 - H 12.7. > No matter what I do, can't turn that darn 'H' into an 'L'! > > Any help would be appreciated. Thanks in advance. > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
