Note that if you plug a connector into either Lin-In or -Out, the audio on the USB cable is no longer available. You can’t use both.
Sent from my iPhone ...nr4c. bill > On Jun 21, 2020, at 11:51 PM, W6IPA <[email protected]> wrote: > > Hi, > > I tried looking online, but could not find any reference of what I’m > experiencing. > On a new to me K3s assembled from a kit, I have high noise on the line out - > which seems to be similar to ground loop noise. > I have no such noise on the headphone jack in the back and in the front or > USB Audio. I have tested by using a Zoom H1n line in. > Almost feels like there is a something with this specific connector. > I’ve tried to play with the CONGIF:Lin OUT menu setting - but I always get > the same issue. I also tried to disconnect the USB cable with no change. > It’s not critical as I’m using the headphone jack and USB connection without > issue. > > Anything obvious I’m missing ? > > Thanks > > JC/W6IPA. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
