No. At field it’s batteries. At home an Astron 35m linear or any or several 
switchers. 

The field setup may be one or two AGM batteries. Nominal voltage 12-12.8 volts. 
 At home it’s 14.1.

Sent from my iPhone
...nr4c. bill


> On Jun 28, 2020, at 10:06 AM, rich hurd WC3T <[email protected]> wrote:
> 
> 
> Same power source?
> 
>> On Sun, Jun 28, 2020 at 08:20 Nr4c <[email protected]> wrote:
>> This started several years ago at a FD. Brought home and worked perfectly.  
>> took to another outdoor event and same thing. Works at home not at events. 
>> 
>> Pulled KPA3 out and applied Deoxit and worked connectors in/out several 
>> times and replaced KPA3. Worked well thru two FDs and number of other 
>> events.  And as main radio after selling my K3S last summer ($ for K4D). 
>> Took down and packed it up for FD about 6 weeks ago and replaced it with an 
>> IC-7300 till the K4 arrives. 
>> 
>> This AM it started again at FD!  
>> 
>> Could this be an LPA issue instead of the KPA3 issue?  Can’t remember if my 
>> KPA3 has gold pins or not. 
>> 
>> Help!
>> 
>> Sent from my iPhone
>> ...nr4c. Bill 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
> -- 
> 72,
> Rich Hurd / WC3T / DMR: 3142737  
> Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
> Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid: 
> FN20is
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to