Not necessarily. If the LED is shorted (admittedly a less likely
possibility) it won't have any (or at least very little) voltage across
it ... just as if its drive circuitry was bad.
Having been an engineer responsible for some LED product lines in the
long distant past, I would say that the most likely faults would be an
open LED (bad wire bond) or some fault in the drive circuitry, but a
crystal fault could also cause a short in the LED.
73,
Dave AB7E
On 7/9/2020 9:34 PM, Vic Rosenthal wrote:
Measure the voltage across the LED when it’s supposed to be on and off. That
will tell you whether the LED or something else is at fault.
Victor 4X6GP
On 10 Jul 2020, at 7:25, W4RAM <[email protected]> wrote:
Good morning,
I am looking for your advice with the follow issue:
D1 LED in my K1 does not work. LED does not light when I activate the RIT
function. I can see in the screen when RIT is activated (ON/OFF).
I already checked the D1 position, also solder, they look correct.
This problem may seem simple to fix, however, and I'm not sure if the
solution is just change the led.
Thank you for your advice and assistance.
Al
W4RAM
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
