Sounds like your audio level it set too low. Try adjusting that up. Don’t quote me, but if memory serves that has to be 4 bars with the 5th flickering. A search through the archives will find that addressed many times. Audio too low makes the K3 “power hunt” which is what it sounds like yours is doing.
73, David - N5DCH > On Jul 13, 2020, at 11:52 PM, John <[email protected]> wrote: > > > When I dial up, or down rf output, it takes in excess of 30 seconds > > to reach the output level, which is much lower than requested. > > 3 "bars" on the rf meter. That looks to be 20 to 25 watts. > > If I readjust the level, up or down, it takes another 30+ > > seconds and it will not go over 3 "bars". > > Anyone offer any suggestions? > > Thanks. > > 73. > > John. > > ve7day. > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
