Every amp that I use I would overdrive with the Elecraft set at 100
watts. I am not familiar with the Quadra, I typically adjust the PWR
(power output) control to the desired wattage and have not had an
issue with any that that I have used. I see a lot of talk about using
ALC on the SPE Expert amp list. I have not used this brand and do not
why ALC appears to be recommend for them. I have not connected an ALC
cable in decades.
John KK9A
Joe Subich, W4TV wrote:
> Is it necessary?
Yes. The Quadra produces is rated 1000 W output with approximately
60W drive. The K3 will overdrive it resulting in splatter/IMD and
potential damage to the transistors.
73,
... Joe, W4TV
On 2020-07-16 7:25 PM, Dean L wrote:
I'm working on a Yaesu VL1000 for a friend and wondering if anybody's had
experience setting up ALC with the K3 and the VL1000?
Is it necessary?
I'm not much of a QRO guy as you can probably tell.
Thanks in advance for your help 73
Dean K2WW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com