K3 won't do both RS232 and USB at the same time. You'll have to put a
software shim in your PC to control the SteppIR.
--
73,
-de John NI0K
https://www.qrz.com/db/NI0K
John Reilly wrote on 7/31/2020 11:53 AM:
I have a BigIR which won't connect to my K3 for frequency control It
worked prior to my move 10 months ago, but not now. I suspect a
setting problem. I use the K3 USB for rig control and audio, and
trying to use the RS232 RJ45 plug for the SteppIR. It appears the
SteppIR is not getting frequency information. How do I configure the
Config > RS232 to enable data to also go to the both USB and the RS232
port?
Thanks,
- 73, John, N0TA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
