Yes, I had a K42 kit laying about and i thought I might finally finish it and see how it worked with my K3 (with most of the S upgrades) I was easily able to fix up the cables for reading code but I have had a heck of a time matching up settings and keying cable connections so I can play around with the external keyer functionality of this little “swiss army knife keyer box” I have Fred Cady’s third edition(Bless him) and he tries to give info in para 4 of page 60 but it is somewhat confusing. There is lots of info following, all the way to pp 84 but it is all oriented to getting a computer married to the K3 for digital modes. The key out mini plug from the K42 uses the three lines as tip: key middle: PTT and the body ground. They say that "the PTT output is used primarily in HSCW mode or to key an amplifier or antenna relay” and the K3 manual indicates that anything like a WinKey interface requires that PTT_KEY should be OFF - OFF. So, it would seem that I could ignore the center conductor entirely. But…my K3 sits quietly and challenges me to to key it externally disregarding all my options.
Any suggestions appreciated. Alan/K6ADG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
