Problem solved. I had not set up a password in the for the host on the main pc copy of the remote software and then had not entered a password in the remote notebook copy of the software. Once I did that I am now able to control the KAT500 from the remote notebook computer.
73 Paul w2eck On Thu, Aug 6, 2020 at 2:21 PM Paul Ecker <[email protected]> wrote: > I have installed the KAT500 software on both my main shack PC and on to > a Win10 Notebook I use for remote ops. I want to be able to change antennas > on the KAT 500 from the Notebook PC. So I start the Remote software on the > shack PC, configure the Host data and then connect which it does. Then > start the software on the remote notebook. I fill in the shack pc 1p > address and port and then it connects. So thought I was doing ok, but not > really. I can change antennas using the KAT500 remote software on the main > pc but not the notebook, so I kind have it connected but backwards. > > So can anyone help? What is the correct procedure for setting this up or > sequence to be able to control the KAT from my remote notebook? Should the > shack pc that the KAT 500 is connected to be the host? > > > > 73 Paul w2eck > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
