I love this handmade stand for my setup from North Ga QRP club - http://nogaqrp.org/
Hank K4HYJ From: John Newgas Sent: Monday, August 10, 2020 1:09 PM To: [email protected] Cc: [email protected] Subject: [Elecraft] re KX3 PX3 desktop stand Ron Bell Asked : > Any recommendation for a desktop stand for a KX3 and PX3 that would keep both > at proper angle and manage the wires? I made a nice and low cost stand using a Music Stand from Amazon like https://www.amazon.com/dp/B0897TDWH9/ref=cm_sw_em_r_mt_dp_mXxmFb8V9KPQC I used a spare bit of wood left over from picture rail to add a second shelf above the KX3/PX3 combo to take a raspberry pi and a Microham USB. The power supply sits behind it it with a four way splitter. ( $6 from Amazon ) The Cables are neatly held in place with stick on Cable Supports. ( https://www.amazon.com/dp/B07TXB9VLZ/ref=cm_sw_em_r_mt_dp_r6xmFbQXPWWK7 ) You need to clean the wood with alcohol before trying to stick down the supports See a picture at https://s3.amazonaws.com/files.qrz.com/q/g7ltq/Station_running_with_headless_Pi.jpg I had to have system which was acceptable to look at as it runs in a corner of our living room. John G7LTQ/AG7VS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
