Bob,
Thanks much for the response.
73,
Barry
K3NDM
On 8/15/2020 12:01 AM, Bob Wilson, N6TV wrote:
On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <[email protected]
<mailto:[email protected]>> wrote:
is the pan presentation fixed as to frequency span or can the
frequency span be adjusted; I typically use 25-50 KHz on CW or
less on data modes.
Span and center frequency are adjustable. Fixed or tracking mode is
available. Scrolling mode (to prevent VFO cursor from going off
screen) has different options, similar to P3: full page, half page,
slide, etc.
Next can the xvter IF out be used as the IF out on the K4D?
Probably it will work the same as a K3.
Or, is the I&Q available for use o0n applications like CW Skimmer;
This requires a MME format.
I don't think that will work. Connecting a separate SDR to RX ANT OUT
would be a simpler way to do it. A program like HDSDR can keep the
SDR frequency in sync with the K4 frequency.
73,
Bob, N6TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
